If your AC stops working and starts blinking, chances are you’re seeing one of the Mitsubishi AC error codes. These codes help you understand what’s wrong without opening the entire unit. This article will explain how to check error codes, what they mean, and when to call AirChill AC Maintenance and Duct Cleaning in the UAE for help.
✅ Official Mitsubishi Error Code Guide:
Visit Mitsubishi Electric Support for official technical details.
How to Check Mitsubishi Error Code
There are two easy ways to check the error code:
Using the Remote
- Turn off the AC.
- Press and hold the “Check” button on the remote for 5 seconds.
- The display will show an error code like P8 or U4.
Watching for Blinking Lights
- Count the number of blinks on the LED light.
- Use a Mitsubishi aircon blinking codes chart to identify the issue.
Mitsubishi VRF Error Code List
These codes apply to VRF systems mostly found in commercial setups.
P8 – Discharge Pipe Temperature Too High
Likely caused by poor refrigerant flow or blocked airflow. Check filters and refrigerant.
U1 – Phase Missing or Reversed
Usually an electrical issue. Make sure wiring is correct and power is stable.
U4 – Indoor-Outdoor Unit Communication Error
Often caused by faulty wiring or broken communication cables.
E6 – Indoor Fan Motor Lock
The fan motor might be jammed due to dust or mechanical issues. Needs technician support.
L4 – Outdoor Unit Overload
Could be due to high temperature, bad compressor, or low refrigerant.
Common Mitsubishi AC Error Codes for Home Split Units
Home AC units often show simpler error codes. Here’s what they mean:
E1 – Indoor/Outdoor Unit Mismatch
The connected units don’t match in model type. Needs expert inspection.
E5 – Voltage Problem
Low or high voltage can disrupt performance. A voltage stabilizer may help.
E9 – Drain Pump Error
Water may not be draining. Check and clean the drain pipe or pump.
EA – Coil Freeze
Usually happens due to clogged filters. Clean them and check airflow.
Why Is My Mitsubishi AC Blinking?
If your AC is blinking, it’s signaling a problem using Mitsubishi aircon blinking codes.
- Slow Blinking: Often a sensor issue
- Fast Blinking: Could be an internal error
- Constant Blinking: Likely a communication error
Count the blinks and compare with your AC manual or consult AirChill AC Maintenance and Duct Cleaning for a quick fix.
Troubleshooting Tips Before Calling a Technician
Before calling for help, try these:
- Turn the Power Off – Wait 5 minutes and turn it back on.
- Clean the Air Filters – Dirty filters often cause freezing or poor airflow.
- Check Outdoor Unit – Remove any blockages.
- Reset the Remote – Remove and reinsert batteries.
If the Mitsubishi AC error code still shows, call AirChill AC Maintenance and Duct Cleaning for expert repair in the UAE.
Why Choose AirChill AC Maintenance and Duct Cleaning?
Here’s what makes them the best:
- Certified Mitsubishi AC experts
- 24/7 emergency AC services across UAE
- Fast repair and original parts
- Specializing in Mitsubishi VRF error code list solutions
- Professional duct cleaning for better air quality
Preventing Mitsubishi AC Error Codes
Regular maintenance reduces the chance of error codes appearing. Here’s how AirChill can help:
| Service | Result |
|---|---|
| Filter & Coil Cleaning | Better cooling, fewer freeze errors |
| Refrigerant Top-Up | Prevents high-temp error codes like P8 |
| Electrical Checks | Avoids U1 or U4 type errors |
| Duct Cleaning | Improves airflow and air quality |
FAQs
Q1: What is the best way to check Mitsubishi error codes?
Use your remote control or observe the LED blinking pattern. Refer to the how to check Mitsubishi error code guide above.
Q2: What does code E6 mean?
It means your indoor fan motor is locked. Call AirChill AC Maintenance and Duct Cleaning to fix it.
Q3: Are Mitsubishi aircon blinking codes the same for all models?
No, they vary slightly between models. Always check your specific manual.
Q4: How often should I get my AC serviced to avoid error codes?
At least twice a year. More frequent if you’re in a dusty or humid area.
Q5: Do VRF systems show different error codes?
Yes, the Mitsubishi VRF error code list includes specific codes for commercial systems like U1, U4, and L4.
Final Words
Mitsubishi AC error codes are there to help you. By learning what they mean and how to check them, you can fix small problems yourself and avoid major damage. For anything complex, especially VRF systems or blinking errors, AirChill AC Maintenance and Duct Cleaning is your trusted partner in the UAE.
Read More: Super General AC Error Code
